PVC waterproof membrane mould
1. JX-PCM-B hanger structure flat mold.
2. A continuous and unobstructed flow surface can be obtained at the die lip, and there are adjustment screws with small intervals, which act on the pressure of the resin and the up and down rebound of the metal, and the die lip can be bent to adjust the die gap.
3. With a movable die, rough adjustment can be performed.
4. With a 90° damping bar, the material flow can be adjusted.
5. Produce 0.5-5mm board and sheet.
6. It is suitable for the production of 1-3mm waterproof membrane.
7. Applicable: PE, PA, PP, PET, ABS, PS and other materials.
8. Mould width: 400-3000mm.
If you have any questions or needs about the product, please fill out the form below and we will contact you as soon as possible.